contact us
site map
Kuhnke manufactures several types of precision regulators for use in fine regulation of air pressure on small air tools, breathing apparatus and other devices. Units are made of nickel plated brass or moulded material and are adjustable or can be factory set for specific applications. Several types are available for mounting on manifolds in addition to standard in line versions. Output pressures range from 0 to 8 bar depending on unit selected. Volume output can be up to 200l/min.
|
Sub - Miniature Pressure Regulator The sub-miniature Series 50 regulator provides regulation of air pressure from 0 to 8 bar. Available in both relieving and non-relieving versions, the unit's size and shape makes it ideally suited for mounting in dental, medical and laboratory equipment where close regulation and fine adjustments are necessary. |
 (1.14Mb) |
|
Miniature Pressure Regulator The miniature Series 50 regulator provides regulation of air pressures from 0 to 8 bar. The regulator is available in both relieving and non-relieving versions. Housing is nickel-plated brass. The regulator is supplied with a panel nut for mounting in a 25mm diameter hole. A large brass knob provides for adjustment throughout the regulator's range. A setting lock nut is included to prevent tampering after adjustment. The regulator has a third port for connection of a pressure gauge. Primary and secondary ports are 180° apart on the side of the regulator body. |
(1.02Mb) |
|
Miniature Screw Driver Adjusted Pressure Regulator The Series 48 miniature regulator has characteristics similar to the Series 50 miniature regulator. The unit, however, is specially designed for systems where constant adjustment of pressure is not necessary. |
(1.16Mb) |
|
Manifold Mounted Miniature Pressure Regulator The manifold mounted regulator provides regulation of air pressures from 0 to 10 bar. The miniature regulator is available in both relieving and non-relieving versions in a nickel-plated brass housing. The unit is provided with a third port for connection of a pressure gauge. |
(1.45Mb) |
|
Manifold Mounted Miniature Pressure Regulator The manifold mounted regulator was designed for use on custom manifolds. The miniature regulator is available in both relieving and non-relieving versions in a moulded housing. |
(641Kb) |
