contact us
site map
Solenoid Operated Miniature Valves are available in 3/2 or 2/2 poppet designs as well as 3/2 or 5/2 spool and sleeve designs. Valves have either M5 (10/32) or 1/8 porting. Most valves have been designed for the special requirements of medical, dental and laboratory equipment. Custom designs are available for unusual applications.
2/2 or 3/2 poppet valves are constructed of a brass base with stainless steel stems and encapsulated coils. Valves are designed for compact mounting and have several mounting configurations.
3/2 or 5/2 spool and sleeve valves are compact and provide long life cycles. Constructed with an aluminum body, stainless spool and sleeve and have encapsulated coils.
Two types of moulded pilot valves are also available for switching small volumes of air needed for remote piloting of other valves or devices.
Accessories include sub bases, manifolds and electrical connectors.
 |
16mm Brass 2/2 or 3/2 The Series 64 solenoid valve is available for in-line, direct or manifold mounting. Its modular construction allows for maximum utilisation of space. Accessories include connecting plugs, surge suppressors and manifolds. All standard valves feature a solid brass housing, buna N seals, encapsulated coils and are mountable in any position. |
 (218Kb) |
 |
22mm Brass 2/2 or 3/2 The Series 65 solenoid valve is available for in-line, direct or manifold mounting. Accessories include connecting plugs, sub-bases and manifolds. All standard valves feature a solid brass housing, buna seals, encapsulated coils and are mountable in any position. |
(243Kb) |
 |
30mm Brass 2/2 or 3/2 The Series 67 solenoid valve is available for in-line or manifold mounting. Its modular construction allows for maximum utilization of space. The valve is available with standard plug terminals. Accessories include connecting plugs, and manifolds. All in line valves feature a solid brass housing, buna seals, encapsulated coils and are mountable in any position. Manifold mounted valves have a cast zinc alloy base. |
(188Kb) |
 |
Steel Spool Valves (M5 Ports). Long life Series 79, 81 and 84 solenoid operated spool valves are constructed of precision lapped steel spools and sleeves. Solenoid coils are encapsulated and have terminals for solder or plug connections. Valves are available for in-line, manifold or sub base mounting. |
(221Kb) |
 |
Steel Spool Valves (1/8 Ports). Long life Series 85 and 87 solenoid operated spool valves are constructed of precision lapped steel spools and sleeves.Solenoid coils are encapsulated and have terminals for solder or plug connections. Valves can be mounted in-line or on manifolds. |
(215Kb) |
 |
Spool Valve Resilient Seal 5/2 The Series 83 sub base mounted valve provides a simple answer to miniature 5/2 valving. The valve is constructed of a moulded body and utilises O-ring construction to provide a lightweight, durable alternative. The valve has red pop-up indicators to show position, as well as a manual override and an external air pilot supply port connection, used when switching pressures less than 2.5 bar |
(144Kb) |
 |
Pilot Valves 3/2 The 3/2 way pilot valve section of general purpose solenoid-operated valves can be used as a remote air pilot valve or for switching low volumes of air when mounted on a sub base or manifold. The valve has a flow of approximately 56l/min at 6 bar. Operating pressure range is 0 - 10 bar.. The valve includes a red lever for manual operation. |
(188Kb) |
 |
Manifolds Manifolds are available for all solenoid operated 2/2 or 3/2 valves. Units are constructed of aluminum bar stock with G1/8 supply ports at each end and M5 output ports along valve stack for Series 64 and 65 valves. Series 67 valve manifolds have 1/8 output ports. Manifolds are all pre-drilled to allow valves to be mounted side by side without intermediate spacing. Standard manifolds are available for single, double or 4 station configurations and can also be special ordered for up to 8 stations. Mounting is via an M5 tapped hole at each end of the manifold. |
(270Kb) |
 |
Electrical Accessories Standard replacement coils are available for all types of miniature solenoid valves. Coils are encapsulated to keep out water, oil and other contaminants providing splash proof protection when used with the corresponding socket and gaskets for miniature valves. |
(196Kb) |
